Determination of the influence of SRG anchors on the bond behavior of SRG/FRCM strips bonded to a quasi-brittle substrate

The use of FRCM composites (Fiber Reinforced Cementitious Matrix) is becoming more and more widespread. The inorganic matrix guarantees many advantages, especially when dealing with masonry substrates, including a good compatibility from both a physical and a chemical point of view and the lower sensitivity to debonding phenomena at the interface. Compared to FRP composites, which presents many data in the literature, FRCM composites must be studied in detail and research in this field has only begun in recent years. This work deals with an important problem: the realization of an anchorage system to improve the strength of composites and allow their use even in the absence of adequate development length. In this study, the effectiveness of the anchorage system and the interaction with an externally bonded FRCM were studied on masonry columns. The columns were tested until failure condition in the Laboratory of Structural and Geotechnical Engineering (DICAM – LISG) of the University of Bologna, via del Lazzaretto 15/5, Bologna. Test results demonstrate that the introduction of additional anchorages improves the effectiveness of the FRCM composites in terms of resistance and loading capacity.