Panza, Matilda
(2026)
Clock recovery studies for the back-end to front-end optical link of the ePIC dRICH DAQ system.
[Laurea magistrale], Università di Bologna, Corso di Studio in
Physics [LM-DM270]
Documenti full-text disponibili:
![[thumbnail of Thesis]](https://amslaurea.unibo.it/style/images/fileicons/application_pdf.png) |
Documento PDF (Thesis)
Disponibile con Licenza: Salvo eventuali più ampie autorizzazioni dell'autore, la tesi può essere liberamente consultata e può essere effettuato il salvataggio e la stampa di una copia per fini strettamente personali di studio, di ricerca e di insegnamento, con espresso divieto di qualunque utilizzo direttamente o indirettamente commerciale. Ogni altro diritto sul materiale è riservato
Download (21MB)
|
Abstract
The ePIC experiment at the future Electron-Ion Collider is designed to investigate the internal structure of nucleons. Within ePIC, the dual-radiator RICH (dRICH) subdetector provides hadron identification using Silicon Photomultipliers (SiPMs) as photosensors, which generate a high expected data throughput of up to 1.3 Tbps. The front-end read-out cards are required to provide digitization ASIC readout and transmit data to the back-end system over 10 Gbps optical links, while recovering the clock signal from the receiving line for synchronization with the collider. To enable effective SiPM dark count rate discrimination and optimize dRICH particle identification performance, the recov-
ered clock must maintain low jitter to preserve detector timing resolution. This study focuses on the implementation of a prototype back-end to front-end link for the dRICH detector, based on the AMD Aurora 64b/66b protocol and utilizing an Artix UltraScale+ FPGA on the receiving end. Methodologies to test the performance of the recovered clock in terms of jitter characterization are presented. Preliminary results show the potential of the tested configuration to achieve a 5 ps RMS jitter
Abstract
The ePIC experiment at the future Electron-Ion Collider is designed to investigate the internal structure of nucleons. Within ePIC, the dual-radiator RICH (dRICH) subdetector provides hadron identification using Silicon Photomultipliers (SiPMs) as photosensors, which generate a high expected data throughput of up to 1.3 Tbps. The front-end read-out cards are required to provide digitization ASIC readout and transmit data to the back-end system over 10 Gbps optical links, while recovering the clock signal from the receiving line for synchronization with the collider. To enable effective SiPM dark count rate discrimination and optimize dRICH particle identification performance, the recov-
ered clock must maintain low jitter to preserve detector timing resolution. This study focuses on the implementation of a prototype back-end to front-end link for the dRICH detector, based on the AMD Aurora 64b/66b protocol and utilizing an Artix UltraScale+ FPGA on the receiving end. Methodologies to test the performance of the recovered clock in terms of jitter characterization are presented. Preliminary results show the potential of the tested configuration to achieve a 5 ps RMS jitter
Tipologia del documento
Tesi di laurea
(Laurea magistrale)
Autore della tesi
Panza, Matilda
Relatore della tesi
Correlatore della tesi
Scuola
Corso di studio
Indirizzo
NUCLEAR AND SUBNUCLEAR PHYSICS
Ordinamento Cds
DM270
Parole chiave
ePIC,dRICH,RDO,hardware,firmware,FPGA,EIC,readout,jitter
Data di discussione della Tesi
29 Ottobre 2026
URI
Altri metadati
Tipologia del documento
Tesi di laurea
(NON SPECIFICATO)
Autore della tesi
Panza, Matilda
Relatore della tesi
Correlatore della tesi
Scuola
Corso di studio
Indirizzo
NUCLEAR AND SUBNUCLEAR PHYSICS
Ordinamento Cds
DM270
Parole chiave
ePIC,dRICH,RDO,hardware,firmware,FPGA,EIC,readout,jitter
Data di discussione della Tesi
29 Ottobre 2026
URI
Statistica sui download
Gestione del documento: