Rheological characterization of low-carbon mortars incorporating ceramic waste from the Emilia-Romagna ceramic district for 3d printing applications

Raguso, Gabriele (2026) Rheological characterization of low-carbon mortars incorporating ceramic waste from the Emilia-Romagna ceramic district for 3d printing applications. [Laurea magistrale], Università di Bologna, Corso di Studio in Ingegneria edile-architettura [LM-DM270], Documento ad accesso riservato.
Documenti full-text disponibili:
[thumbnail of Thesis] Documento PDF (Thesis)
Full-text non accessibile fino al 27 Marzo 2028.
Disponibile con Licenza: Creative Commons: Attribuzione - Non commerciale - Non opere derivate 4.0 (CC BY-NC-ND 4.0)

Download (4MB) | Contatta l'autore

Abstract

The decarbonisation of the construction sector requires cementitious materials with lower clinker content, reduced use of virgin raw materials and compatibility with innovative construction technologies. This thesis investigates ceramic waste from the Emilia-Romagna ceramic district as a replacement for calcined clay in low carbon mortars for extrusion-based 3D printing. Two industrial residues are examined: RC1, generated during the rectification of porcelain stoneware tiles, and RC5, fired ceramic waste produced during machinery testing. Both are used without additional grinding. Four binder systems are compared: CEM I, LC³ containing calcined clay and limestone, and two LC³ formulations in which calcined clay is fully replaced by RC1 or RC5. Four superplasticizers with different molecular architectures are also investigated to assess binder–admixture interactions. The experimental programme combines rheometric measurements of static yield stress and structural build-up, flow-table tests, ShapeGen3DCP simulations and printing trials with a WASP 40100 LDM printer. The results show that rheological behaviour depends on the interaction between PCE structure and binder composition rather than on side-chain length alone. Conventional LC³ exhibits the highest structuration rates, whereas ceramic-waste formulations show a more manageable processing window. Numerical and experimental results confirm that both RC1- and RC5-based mortars can achieve printable geometries when particle-size distribution, sand content, superplasticizer dosage and printing time are appropriately calibrated. RC1 shows a more pronounced reactive response than RC5, requiring different optimisation strategies. Overall, the study demonstrates the potential of locally sourced ceramic waste as a substitute for calcined clay in reduced-clinker mortars compatible with additive manufacturing, supporting circular material use and future development towards construction-scale 3D printing.

Abstract
Tipologia del documento
Tesi di laurea (Laurea magistrale)
Autore della tesi
Raguso, Gabriele
Relatore della tesi
Correlatore della tesi
Scuola
Corso di studio
Indirizzo
CURRICULUM ARCHITECTURAL ENGINEERING
Ordinamento Cds
DM270
Parole chiave
ceramic waste, low-carbon mortars, rheology, 3D concrete printing, circular economy, polycarboxylate ether based superplasticizer
Data di discussione della Tesi
7 Ottobre 2026
URI

Altri metadati

Gestione del documento: Visualizza il documento

^